Cabins to Go

Monday to Thursday 8.30 to 4.30.
Friday 8.30 to 4pm.

All cabins are prebuild on our premises then transported to site.

Yes - all cabins are fully insulated with batts in the walls, ceilings and under the floor.

Units can be provided with power connectors which allows easy connection to existing power outlets at most homes or camp sites.

Yes most units are suitable for either relocation on trucks or in most cases can be built with trailers fitted to make relocation easy and quick.

Towed with our 4 x 4 vehicle, we need unobstructed access to get the cabin onto site.

Yes

Yes

We have 2 options chemical type or pump system:
PORTA POTTI chemical toilet it has a holding tank, the tank is emptied, down a toilet or sewage drain.
STANDARD TOILET, with a broy split pump it has a temporary hose connection to a gully trap, sewer or septic tank.

The water can go into a holding tank or broy split pump.

We supply a caravan lead & interface box which is plugged into a builder’s pole or a 3 pin plug at the house

We can make small changings to suit your requirements however Cabins To Go are not a bespoke builder, we manufacture a number of standard cabins this is the best way to improve product quality it also keeps labour costs down, the benfit for you is a quality cabin at an affordable price.

A flat or near level site is required for cabin, we need 3.5mtr clear space around the cabin & above the cabin ie: clear of overhanging trees & Eaves of the house. Room is needed for maneuvering & turning the cabin into position.

Most areas at least 1.5 mtrs of the boundry, in some areas you need 3mtrs

It is retractable so you will have more room around your cabin.

3.1 mtrs at the highest point center of the cabin on the outside from the ground to the top of roof. Inside height 2.2m in the middle and 2m at the ends.

The cabin is plug & go type so requires water & power, for an optional extra your cabin can be made self-contained with onboard tanks and power systems.